Generator Electrical Input Requirements: 415VAC | 3Phase | 50Hz | 15 Amps. Output Power: 3000 Watts. Output Frequency: 20–40 Khz. System with MMI Display: Schneider. Transformer MOC: Al Powder Coated. Output Voltage: 10 KVolts. Interlocks: Spark Gap Interlock which trips the Generator when the Discharge Station High Voltage Wire Breaks during Operation. Cooling: Transformer Oil Safety Interlocks Zero Speed System: In case the Guide or Main Roller stops moving , the Generator Trips. Spark Protection: In case of Spark in the Electrodes, the Generator will Trip. Phase Protection: In the Event of any Phase Failure, the Generator will Switch Off Completely Discharge Station Door Open Interlock: When the Door Opens, the Generator will trip. No Corona Interlock: In case of No Corona, A Visual/Audio Indication will be given. Pneumatic Operated Split Box Assembly Electrodes: 100mm Rollers Covered with Silicone Sleeves driven Externally by AC Motor. Treating Rollers: 150mm Roller with External Drive Arrangement with Motor and Drive Synchronised with Machine Line Speed. Guide Rollers: 75mm rollers for Entry & Exit of Film. Ozone Extraction System Motors: 3 HP | 3 Phase | 415 V | 15 Amps. Inlet: 2 x 75mm. Outlet: 100mm. Accessories Cables: As per Installation Requirements. Dyne Level Pens: 44 Dynes Disposable Pen.